View Single Post
Old 29th February 2008, 06:38 PM   #4 (permalink)
mrlizard
Senior Member
 
mrlizard's Avatar
 
Join Date: Jul 2003
Location: The Glen of Tranquility
Posts: 1,081
mrlizard is a jewel in the roughmrlizard is a jewel in the roughmrlizard is a jewel in the roughmrlizard is a jewel in the roughmrlizard is a jewel in the roughmrlizard is a jewel in the roughmrlizard is a jewel in the roughmrlizard is a jewel in the roughmrlizard is a jewel in the rough
Quote:
Originally Posted by ubermensch View Post
That's cool - why small diaphragm condensers? Everywhere else i've read have recommended large diaphragms for this technique, presumably to get more body out of the rest of the kit as it's relying on fewer mics.

If you're spot micing as well, then I guess that isn't much of an issue though.

I've read that it's easy to get a good stereo image from this method, which I'm worried about achieving with other more conventional means.
because they respond better to transients, handle higher SPLS (although alot of large diaphragm condensors will handle em too) and don't colour the sound as much. Alot of large diaphragm condensors eg. TLM103, M147, U87, U47 etc. have a very pronounced presence peak so they work well as a vocal mic, but if you're after a natural drum sound you don't want to use an annoyingly bright mic. There are other disadvantages too.

There are large diaphragm condensors availiable that don't have this sort of peak such as the AKG 414 B-ULS or the transformerless TLII these work well for these applications but are still going to be quite coloured (possibly in a pleasant way, depends on the application)

Personally I'd use a large diaphragm if i needed to flatterthe sound in some way, small diaphragm if the kit sounded right in the room and i wanted accuracy and sweet top end, ribbons if i wanted to take the edge off. I'd never use anything with a presence peak on cymbals.

People often make the assumption that small diaphragm condensors have less bottom end, because they are small. it's not true. The response is usually flatter and more extended than a large diaphragm.

They also have a better off axis response which is crucial if you are recording a drum kit, if you're mic is next to the ride you don't want the snare which is off to the left sounding funny, it'll screw with your stereo image too. They are generally noisier and require more gain than large diaphragms, but that wouldn't be an issue when recording drums.

I tend to prefer omni's for a natural room sound as well.

Do whatever works for you..

p.s. where you reading this?
mrlizard is offline   Reply With Quote